ALFA NETWORK AIP-W505 - Manual (Page 46)

C HAPTER 5 | Operation Mode
Logging In
– 46 –
L OGGING I N
It is recommended to make initial configuration changes by connecting a
PC directly to one of the 11n Router’s LAN ports. The 11n Router has a
default IP address of 192.168.2.1 and a subnet mask of 255.255.255.0. If
your PC is set to “Obtain an IP address automatically” (that is, set as a
DHCP client), you can connect immediately to the web interface.
Otherwise, you must set your PC IP address to be on the same subnet as
the 11n Router (that is, the PC and 11n Router addresses must both start
192.168.2.x).
To access the configuration menu, follow these steps:
1.
Use your web browser to connect to the management interface using
the default IP address of 192.168.2.1.
2. Log into the 11n Router management interface by entering the default
user name “admin” and password “admin,” then click Login.
N OTE :
It is strongly recommended to change the default user name and
password the first time you access the web interface. For information on
changing user names and passwords, see “Administration Settings” on
page 106 .
Figure 22: Logging On