Alyseum MS-MATRIX - Manual (Page 13)

MS-MATRIX – User’s manual © - Revision 1.5
Page 13
6 Miscellaneous
6.1 Disclaimer
All rights reserved. Reproduction in whole or part of this document is prohibited without the
express permission of Alyseum.
© 2011-2015 Alyseum
The information and specifications described in this manual are subject to change without
prior notice
Throughout this manual, trademarked names might be used. We state herein that we are
using the name to the benefit of the trademark owner, with no intention of infringement.
6.2 Maintenance
Switch Off the power before maintenance.
Do not attempt to clean the module with chemical solvents (thinner, benzene or alcohol) as
this might damage the finish. Use only a clean, dry cloth.
6.3 Static Electricity, ESD
Electrostatic discharge (ESD) can cause malfunction and/or damage to electronic devices
if discharged into the module.
Despite Alyseum products having built-in protections against ESD, voltages might build
up at levels that could harm your equipment.
6.3.1 Some tips and precautions for ESD sensitive environment
● Make sure to discharge any built-up static electricity from yourself and your devices
before touching or connecting one device to another
● Ground yourself by touching an earth grounded metal surface before handling your
module and other equipments.
● For fixed installations, place the module in a grounded metallic rack.
● Ensure air relative humidity is minimum 60%.
● Install ESD specific prevention items, such as grounding mats.
● Reduce movement speed when handling or (dis)connecting devices
● Avoid carpet or other synthetic flooring.
6.3.2 Standard symbols for ESD advertising