Alyseum MS-MATRIX - Manual (Page 3)

MS-MATRIX – User’s manual © - Revision 1.5
Page 3
3 What is the MS-MATRIX ?
The Alyseum MS-MATRIX is a Eurorack module consisting of a dynamic matrix, both
analog and digital in nature, which supports 16 inputs and 16 outputs. A special 256 LED
display makes for a friendly and intuitive graphical user interface, with each LED
representing one of the 256 points of connections available.
The module accepts a variety of signals such as Gates, Clocks, CV and VCO
simultaneously, while the different user configurations can be saved as user Presets in 32
locations.
These Presets can be recalled manually, by a dedicated CV Input on the front panel, by
MIDI (either incoming Note On or CC), or by the Make Noise CTRLSEL line of modules.
The Input and Output expander mixer modules can be controlled by MIDI commands from
the main unit via infra-red (IR) link. No need for additional cables which might cause
ground loops or interferences!
3.1 Features
● Specialized single Chip from Analog Device (AD75019) which guarantees:
o Wide signal range: from –11 Volts to +11 Volts
o Isolation between any two channel: -92dB at 1 KHz
o Low distortion: 0,01%
o Low
noise
o High bandwidth DC up to 20KHz
● 16 low offset input & output buffers
● 32 presets storage in flash memory, selectable manually, via MIDI (Note or CC),
Control Voltage, or the Make Noise CTRLSEL line of modules
● Programmable MIDI channel number for PGM CH or NOTE.
● Optical hi-speed infra-red (IR) data emitter to control the slave modules MS-4IA and
MS-4OA, with: Zero HF noise, Zero risk of ground loop and Zero cables.
3.2 Specifications
● Front panel width: 132 mm (26HP)
● Module maximum depth: 26 mm
● Inputs jacks: 3.5 mm - ring/tip
● CV and Digital input maximum level: -11 to +11 Volts
Power requirements: +12 Volts regulated at 50 mA, -12 Volts regulated at 50 mA, +5 Volts
regulated at 150 mA