Analogue Solutions Polymath - Manual (Page 31)

Polymath
Analogue Solutions | Circuits – Main PANEL 31
The wet effect signal is output here.
DRY Control
Sets the level of dry signal fed to the MIX output socket
MIX Output socket
This is the wet effect signal plus the dry signal.
Note; spring units are typically ‘quite noisey’ compared with modern effects, and even some
other types of vintage effects. So don’t expect a perfect signal to noise ratio. Always try to
keep the audio level of the input signal as high as possible.
It is normal to here a metallic boing sound if the case is knocked or moved since a spring
reverb is a mechanical effect!