Polymath – Analogue Solutions Polymath User Manual
Page 32
Polymath
32
Circuits – Main PANEL | Analogue Solutions
LOW ER SECTION / EXPANDER PATCH PANEL
MULTIPLE 1/2
A multiple is used to split signals. It is not a mixer!
It would typically be used to split an audio or CV so that it can be fed to more than one
source.
INVERTER
The inverter will invert any control voltage fed into it.
There is one signal input, and two inverted outputs.
MIDI NOTE-TRIG
MIDI Note Trigs 00 and 01 are used for triggering EGs or to clock the sequencer, for
example. The notes share the same MIDI channel as the rest of the synth. These 2 MIDI
notes will not affect pitch.
#00
This is a gate voltage that is produced each time MIDI note 00 is received. This is also pre-
patched to the Sequencer Clock Source switch, so the sequencer can be clocked using MIDI
note 00 – a far more versatile method than using MIDI Sync.
#01