Analogue Solutions Polymath - Manual (Page 39)

Polymath
Analogue Solutions | Circuits – Main PANEL 39
This button toggles on/off the selected step’s Gate. When off, no gate is output for that step,
when on a gate will be output for that step (when the sequencer is running).
It is best to stop the sequencer when setting the steps’ Gates on or off.
ADVANCE push button
Pushing this button steps the sequencer forward one place. Typically this would only be
used when the sequencer is stopped.
CV Control and Output socket (x2)
There are two identical CV outputs available from the sequencer.
Each has its own CV level control and output jack.
PITCH
This control sets the amount the sequencer will ‘play’ all four VCOs.