Analogue Solutions Polymath - Manual (Page 40)

Polymath
40 Circuits – Main PANEL | Analogue Solutions
CUTOFF
This control sets the amount the sequencer will change the filter cut-off
GATE output socket
This is the gate signal generated by the sequencer
RESET input socket
This socket is used to reset the sequencer to step one. A 5V signal will reset the sequencer.
To reset the sequencer from MIDI, patch this to the MIDI NOTE #001 sockets. Every time
MIDI Note 002 is played by keys or a DAW, then you can reset the sequencer.
KEY MODES MODE
POLY push button / LED
Push this button to toggle between mono and poly modes.
In Mono mode, Polymath will play all VCOs at the same pitch.