BUCHI SpeedDigester K-439 User Manual
Page 28
6 Operation
28
K-439 Operation Manual, Version A
6 .6
How to prepare the software for routine digestion
Configure the software according to the following steps to prepare it for routine digestion:
Standard instrument settings
1.
Manual mode (development of digestion method)
2.
Digestion methods (storage of developed method)
3.
Preheating
4.
Start digestion
5.
6 .6 .1
Standard instrument settings
This configuration consists of typical settings, which have to be defined before the instrument is used
for the first time. These settings do not have to be changed, as long as the instrument is not updated
or extended by any additional accessory (e.g. Scrubber B-414).
Select Main Menu > Settings.
The following screen appears:
The following settings can be entered:
Language (select the required language (de, en, fr, it, es, jp, zh)
•
Display Contrast (15 to 85)
•
Buzzer (On or Off)
•
Scrubber present (Yes, if connected / No, if not connected)
•
Device Type (K-439, predefined, cannot be changed)
•
Demo Mode (must be set to "No" for operation)
•
Acceleration (only needed for Demo Mode)
•