Cannon Instrument SimpleVIS - Manual (Page 4)

The ~MAINS symbol indicates instructions or connections for the AC power
supply. The AC Power input must match the electrical specifications listed on the
label on the rear panel of the instrument. The supplied AC Mains power cord
must be attached to the connector labeled ~MAINS. This connection serves as a
means of disconnect and should be readily accessible.
The (O) symbol indicates the OFF position for the electrical switches for your unit
(AC Mains or accessories).
Routine SimpleVIS
® Viscometer operation may require the use and
handling of hazardous chemicals and solutions. CANNON ® Instrument Company
strongly urges the operators and technicians working with the SimpleVIS ®
Viscometer to take proper safety precautions when working with these materials.
These safety procedures can be found in the Material Safety Data Sheets which
accompany the solutions.
SimpleVIS ® Viscometer Specifications/Compliance
Product Info. Model: SimpleVIS ® Viscometer (Cat. No. 9725-S10)
Applications ISO VG Lubricants, SAE Engine and Gear Oils
Methodology Kinematic Viscosity, ASTM D7279 or ASTM D445-Modifi ed
Test Temperatures 40 or 100 °C - user selectable
Viscosity Range 40°C: 10 – 700 mm 2 /s (cSt)
100°C: 5.5 – 200 mm 2 /s (cSt)
Accuracy < 3% of measured value, calibrated
Repeatability < 2% of measured value, typical
Sample Material Type Mineral Oils, Synthetic Oils, Formulated Motor/Gear Oils
Solvent Compatibility Internal wetted components compatible with n-heptane only
Volume Requirements Sample: 450 – 500 μL Solvent: 10 – 15 mL per test
Dimensions 128 mm wide x 356 mm deep x 304 mm high (5x14x12”)
Weight SimpleVIS ® Viscometer unit: 4.6 kg (10.2 lbs)
Shipping Weight 12.3 kg (27 lbs) with all accessories
Input Power SimpleVIS ® Viscometer Operation Voltage: 11 – 13 VDC @ 5A peak
AC/DC Adapter
Power Requirements
100~230 Volts, 50/60 Hz, 100 Watts
Operating Conditions 15°-30°C, 10%-90% R.H. non-condensing, Installation Category II, Pollution degree 2
Compliance CE Mark: EMC Directive (2004/108/EC); Low Voltage Directive (2006/95/EC);
HI-POT (1900 VDC, 60 sec.); ROHS
~MAINS
( O )
4
Hazardous materials