Checkline DT-329 - Manual (Page 15)

12
Press the “RATIO” key. The current mode will start blinking for 5 seconds allowing modification at this point.
Operation Indication
** While in the flash pulse duration setting mode, if no manual changes are made to the DT-329 settings for
5 seconds the LCD display will return to a normal indication of each mode.
Press “PHASE+” key, or turn the dial clockwise to increment the Focus by 0.1°.
Press “PHASE-” key, or turn the dial counter clockwise direction to decrement the Focus by 0.1°.
Return to normal internal flashing
mode and display
When blinking, flash duration can be modified (see
next section for directions on this step)
Internal flashing mode External trigger mode
Phase shift
angle
Flash pulse
duration
(blinking)
Phase shift
angle
Flash delay
angle
Flash pulse
duration
(blinking)
When blinking, flash duration can be modified (see
next section for directions on this step)
Return to normal external
triggering mode and display
** **
Press and release
Flash delay
angle
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
FOCUS FOCUS FOCUS FOCUS
FOCUS FOCUS FOCUS FOCUS
FOCUS FOCUS FOCUS FOCUS
FOCUS FOCUS FOCUS FOCUS FOCUS FOCUS FOCUS FOCUS
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
Auto Range
Trigger
Edge Deley Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○