Checkline DT-329 - Manual (Page 26)

23
4.5.3 Delay setting
Delay time and angle setting will allow the flash to be delayed after an external pulse is sensed by the unit.
The Parameter setting mode:
Press “PHASE +” and “PHASE -“ key, to select between delay time and delay angle.
4.5.3.1 Delay time setting
Selecting Delay time from an external pulse input to LED flashing can be set in the range of 0 – 999 msec,
with a resolution of 1msec.
For details, please refer to “4.4.2 Flash delay setting”.
Rotate the dial clockwise to increase delay time setting or counter clockwise to decrease the delay time.
Operation Expression
Go to delay angle setting
Go to delay angle setting
FLASH
PHASE-
FLASH
PHASE-
Turn clockwise
Turn counter
clockwise
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
ms
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
ms
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
ms
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
ms
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
ms
Auto Range
Trigger
Edge
Delay Deg
Flash Time
Ave Last Min Max
min
sec
h Hz
○○○○
ms