Compex FIT - Manual (Page 145)

145
EN
C
ompe
x F
it - U
ser M
anual
Warranty
See the enclosed leaflet.
Maintenance
Do not sterilise the stimulator. Clean using a soft cloth and an alcohol-based, solvent-
free cleaning product. Use only a minimum amount of liquid when cleaning the
Compex. Do not attempt to repair the stimulator or any of its accessories. Never
dismantle the Compex or the charger containing high voltage parts because of risk of
electric shock.
Compex declines all responsibility for any damages or consequences resulting from
unauthorized attempts to open, modify, or repair the stimulator. This may only be done
by persons or repair services authorized by Compex. Your stimulator does not require
calibration.
All units are systematically tested and validated prior to distribution. Their characteristics
do not vary under normal conditions. Nonetheless, as the Compex is a high-quality
electrical instrument, its lifespan depends on the use that is made of it and the care
and maintenance it receives during its lifetime. If your stimulator contains parts that
seem worn or defective, please contact your nearest Compex customer service centre
regarding an upgrade. Medical and health professionals are obliged to service the
unit in compliance with relevant national laws and regulations. This involves testing
performance and safety parameters at regular intervals.
Storage and transportation conditions
The Compex contains a battery. For this reason, it must be stored and transported in
accordance with the following conditions:
Storage and transportation temperature: - 20° C to 45° C
Maximum relative humidity: 75 %
Atmospheric pressure: 700 hPa to 1060 hPa
Use conditions
Temperature: 0° C to 40° C
Relative humidity: 30 % to 75 %
Atmospheric pressure: 700 hPa to 1060 hPa
Do not use in areas where there is a risk of explosion.