COP-USA ALC-WF User Manual
Page 18
Figure (14)
Step 1: Click the Server Type drop-down list box, and then select the device type to be added.
Step 2: Input the address of device (IP address or domain name) after the Address box.
Step 3: Input the use defined local name after the Local Name box.
Step 4: Input the data port number of the device after the CMD Port box. The default port number
for DVS/IP Camera/37 series network DVR is 8200, this port is user definable. You can fill this
box using the data port number in the networking settings.
Check the box
『
Enable Auto Logon』
. When you logon the server next time, it is not
necessary to input user name and password.
In the local area network, the steps to add the DVS/IP Camera/37 series network DVR
server are as below:
Click the
『
Search』
button, and the dialogue box below will pop up.