COP-USA ALC-WF - Manual (Page 37)

9. DVS/IP Camera parameters setting
There are two methods to enter DVS/IP Camera Parameters Setting Interface; the operations
are detailed as follow:
Method 1: Use IE to access DVS/IP Camera, after login, click “Setting” on the page to enter
DVS/IP Camera Parameters Setting Interface.
Method 2: Use digital management center software (CMS) to log in DVS/IP Camera, after
the device is selected, click “Remote Setting” on software menu to enter DVS/IP Camera
Parameters Setting Interface.
8.3 Channels Settings
Profile
Please see the figure below as the interface for channels setting. Within the setting options, users
may configure DVS/IP Camera for its channel name, audio parameter, etc.
Channels Setting
Functional description of options