COP-USA DVRPRO04 - Manual (Page 36)

31
Chapter 7 Chapter 7
SYSTEM SETTINGS
The System Settings Panel is the main window for naming and setting basic
configurations for the DVR. These very important settings make sure that the
DVR system may be correctly viewed both locally and remotely. Incorrect
system configuration may result in abnormalities in the system, which could
make tech support more complex and time consuming. Follow these steps to
set up your DVR machine(s).
1. Click the Setup Icon on the Main Screen-------------------------
2. Click the System Tab
Figure: 7-1: System Tab
Note: NAS, NTP, and Audio are optional, please read the Appendix to
understand the operating steps.
3.Type in a name for the DVR host up to 32 letters for the purpose of
machine identification when sending an email alarm.
4. Enter the Host’s IP Address, Subnet Mask, DNS Server and SMTP of
Internet field. Connecting the Internet via LAN, please check “LAN” and
key in the “Default Router” that your Administrator has assigned to you.