COP-USA DVRPRO04 - Manual (Page 38)

33
Chapter 7
4. Click Save to save your settings, and then click Manual Register , if
there shows a register success message, which means the domain
name
ote. will be enabled after 3 mins.
Note: A complete domain name is “Account + .dvrsite.net”
Ex: Account name is dvr124, enter http://dvr124.dvrsite.net to connect
the DVR.
Illustrations of DDNS Service Settings
1. Account: Name of domain name. DVR will connect to database
server to check if the account exists, and then check the password.
nly the correct account and password will enable the mapping of
domain name and IP.
2. Password: The password of Account.
3. Auto register after connection: When ADSL disconnection,
system will auto redial, sometimes ISP will offer another IP. To enable
this function, system will auto update the correspondent IP when
ADSL assigns another one.
4. Manual Register: ser register account and IP by himself. Right
contrary to Auto register after connection
5.Save: Save the settings. nly after saving would enable all your
settings
Modem Dial-up
DVR users can choose modem dial-up for connecting external Network.
Windows users can also dialup (using PPP) to DVR for remote monitoring.
To set up modem diap-up, do the following:
Check the “Dialup” in the Internet field and enter the “TEL No.” (the phone
no. of ISP), “Account” and “Password” (your account and password from
ISP).Then click the “Dail” button to test the dail-up procedure. If successful,
“disconnect” field will revert to the IP assigned by ISP. After finished your
test and idle for 30 seconds, the connection will be hung up by the system
automatically and the “IP” field will revert to “disconnect” again.
If users chose to connect the external network by modem dialup, DVR will
use modem dialup for alert e-mail delivery, the Network connection would
be hung up by the system automatically(idle for 30 seconds) when sending
out the alert e-mail.