COP-USA DVRPRO04 - Manual (Page 56)

51
Chapter 9 Chapter 9
ALARM LOG
With the DVR system, the camera frames will keep flashing in red and send-
ing out the alarm when alarm event happens.
The Alarm Log provides the administrator of the DVR with a detailed log of
the alarm incident, including the reason for the alarm (which camera sent out
what kind of alarm), the time the alarm was triggered and the description of
the alarm triggering event. Thus you can handle the entire alarm status
conveniently.
The log is simple and allows the administrator only two options:
a to delete a single log.
b to delete all log files.
Follow the next few steps to set this up:
Deleting One Log
1.Click the Alarm Log Tab
2.Select the file you wish to delete
Figure 9-1: Alarm Log / Selection File
3.Click Del button .
4.A confirmation pop-up screen will appear asking you to reconfirm.