COP-USA DVRPRO04 - Manual (Page 67)

62
Preset Setup
Once you have become familiar with these settings and defined your de-
sired parameters, you are ready to preset your PTZ camera. The Digital
Video Recorder provides users with 128 preset positional orientation points
for each connected PTZ device. For each preset point, users can adjust the
speed and duration interval for the camera.
1.Specify the preset point number from 0 to 128 0 means LL,
that s M TI .
2.Set the Speed of the PT camera adjustment range from 0 to 7 ,
then adjust the Dome orientation.
Figure 12-5: Preset Setup
3.Specify the Speed within the preset point field this ranges from 0
degree per second to 255 degrees per second and the duration
Time range from 0 to 255 seconds to make adjustments to
preset speed and duration time for the PT camera.
4. nce complete, click the Save button .
5.To view any of the preset camera pictures in later time, just insert
the appropriate camera number in the Preset field.
6.Click Clear one preset to delete a preset
point.
7.Click Clear all preset to delete all presets.
Grouping Presets
The Digital Video Recorder gives users the option to set up to 128 presets.
Of the 128 presets, presets 1 to 4 make up Group One, presets 5 to 8 make
up Group Two, presets 9 to 12 make up Group Three and presets 13 to 16
make up Group Four. The remaining presets are only used to view pictures
preset points