Doepfer A-155 Analog/Trigger Sequencer - Manual (Page 6)

A-155
Analog / Trigger Sequencer
System A - 100 doepfer
6
a speed determined by the Glide control knob (fig. 2).
If you patch the output from the Gate row into the
Glide Ctrl. input §, you can switch the glide func-
tion on or off for each step, like on the Roland TB-
303 (see fig. 2). If you patch the gate output through
an A-165 trigger modifier, every gate activates ‘glide’.
fig. 2: glide function
9 Control
The control section 9 includes four push-buttons for
manual sequencer control. Alternatively, digital control
signals can be sent to four corresponding sockets.
• Start : Used to start the sequence - i.e. to set it
running.
• Stop : Used to stop the sequence.
• Step : Used to step through the sequence one
step at a time. Each button-press corre-
sponds to a clock pulse.
• Reset : Used to ‘reset’ the sequence - i.e. to send
it back to begin again at step one.
Clock
Gate
Trig. 3
Gate
Post Out
Pre Out
1 2 3 4 5 6 7 8