Freerider FR168W - Manual (Page 10)

18 19
WARNING! Prevent controller harness damage! Avoid routing the controller harness on the
outside of the armrest pad. Route the harness under the armrest or toward the inside of the armrest
pad. Use correct tie-down points for the controller harness to prevent the harness from getting caught
in the drive tires, pinched in the seat frame, or damaged when passing through doorways.
Figure 14.Armrest assembly.
Figure 16.Controller connects.
Figure 17.To tie the controller harness safely.
Figure 15.Controller assembly.
Armrest - Right
Armrest - Left
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may
lose control of the seat if they do so.
7. Controller (Joystick) assembly. (See figure 15).
8. Connect the controller harness to the power base and joystick. (See figure 16).
9. Route the controller harness along the armrest receiver to the rear of the power base and secure
with the wire ties provided in the owner's package .(See figure 17).