Freerider FR168W - Manual (Page 12)

22 23
NOTE: To rotate the seat, use the seat release lever located under the seat.
Manual recline seatback adjustment
You can adjust the seat back angle with the seatback release lever. The lever is located on the left side
of the seat base.(See figure 20.)
How to adjust the recline angle?
1.Pull up on the seatback release lever.
2.Lean forward or backward to the desired position.
3.Release the lever.
Figure 20.Seatback adjustment. Figure 21.Armrest angle adjustment.
ARMREST ANGLE ADJUSTMENT
To change the armrest angle:
1.Lift the armrest straight up so that it is perpendicular to the floor. (See figure 21.)
2.Loosen the bolt and jam nut.
3.Turn the adjustment bolt to raise or lower the front of the armrest.
4.Tighten the jam nut to lock the adjustment bolt into place.
ARMREST HEIGHT ADJUSTMENT
To change the armrest height:
1.Loosen the knob on the height adjustment pipe.(See figure 22.)
2.Raise or lower the armrest to the desired height.
3.Tighten the knob to secure the height adjustment pipe.
ARMREST WIDTH ADJUSTMENT
You can change each armrest’s width independently of the other.
To change the armrest width:
1.Loosen the knob which is fastened on the pipe.(See figure 23.)
2.Slide the armrests in or out to the desired width.
3.Tighten the knob to secure the armrest.
CONTROLLER POSITION
You can move the controller in toward or out away from the armrest.
To adjust the position of controller:
1.Loosen the knob which is fastened on the pipe.(See figure 24.)
2.Slide the controller into or out of the armrest to the desired position.
3.Tighten the knob to secure the controller.
WARNING! Do not place the controller harness so that it can be pinched in the seat frame or
the power base frame.
FOOT PLATFORM ANGLE/HEIGHT/DISTANCE ADJUSTMENT
You can adjust the angle/height/distance of the foot platform.(See Figure 25~26).
Figure 22.Armrest height adjustment. Figure 23.Armrest width adjustment.
Figure 24.Adjustment controller position.