Hangar 9 Pulse XT 40 ARF - Manual (Page 29)

29
Required Parts
•.Fuselage. •.Engine.mount.(2)
•.Cowling. •.Fuel.tank
•.6-32.locknut.(4). •.#6.washer.(4)
•.Clevis.w/retainer. •.Throttle.pushrod
•.3mm.x.6mm.screw. •.Thick.foam
•.6-32.x.3/4".screw.(4)
•.6-32.x.1
.
1 /
4
".screw.(4)
•.Pushrod.connector.w/backplate
•.#2.x.1/2".sheet.metal.screw.(4)
•.4-40.x.1/2".socket.head.screw
Required Tools and Adhesives
•.Drill. •.Phillips.screwdriver
•.Drill.bit:.5/64".(2mm),.5/32".(4mm)
 .Step 1
Mount.the.engine.mount.onto.the.firewall.using.four..
6-32.x.3/4".screws.
 .Step 2
Position.the.engine.on.the.engine.mount.so.the.drive.
washer.is.4".(102mm).ahead.of.the.firewall.
 .Step 3
Mark.the.location.of.the.engine.mounting.bolts.using.
a.felt-tipped.pen..Drill.the.engine.mount.using.a.5/32".
(4mm).drill.bit.
Section 7B: Glow Engine Installation