Char-Griller LP Gas Grill Grillin Pro 3001 User Manual
Page 10
page 10
Step 4
Install the two (2) LEG BRACES to the LEGS using eight (8) LOCK WASHERS and eight (8) ½”
BOLTS as shown. Remember to NOT tighten the bolts until the grill is completely assembled.
Step 5
Attach the FRONT PANEL to the inside of the front LEGS using four (4) LOCK WASHERS and
½” BOLTS as shown below.
Step 6
Attach the GRILL BODY to the LEGS using four (4) LOCK WASHERS, four (4) ½” BOLTS and four (4)
FLAT WASHERS as shown. Make sure to insert the bolt first through the lock washer then the flat
washer then through the grill body as shown. You may need to loosen other bolts and move the GRILL
BODY slightly to get the holes in the GRILL BODY to line up with the holes in the LEGS.
™ & © Char-Griller / A&J Mfg.
Lock Washer
LEG BRACE
Lock Washer
Flat Washer
Lock Washer
Bolt