Char-Griller LP Gas Grill Grillin Pro 3001 - Manual (Page 13)

page 13
Step 12
Attach the HOOD HANDLE to the HOOD with two (2) LOCK WASHERS and two (2) WING
NUTS as shown below. Attach THERMOMETER as shown.
™ & © Char-Griller / A&J Mfg.
Lock Washer
Step 13
Install the two (2) GAS CHIMNEYS to the GAS GRILL HOOD and the CHARCOAL
CHIMNEY to the CHARCOAL GRILL HOOD. Insert the CHIMNEYS through each hole
from inside the HOOD and secure with two (2) HEX NUTS and two (2) ½” BOLTS for each
CHIMNEY, see below.
Step 14
Attach the HOOD to the GRILL BODY using the HINGE PINS as shown. First place the HOOD
onto the GRILL BODY then screw the HINGE PINS into place and then insert COTTER PINS
through the holes in the HINGE PINS on the inside of the GRILL BODY.
Wing Nut