Panasonic NE-1064F - Manual (Page 10)

C. Programmed Heating:
Example: 1 stage; Memory Pad 9 to heat for 3 minutes at HIGH Power
•Press the Memory Pad 9.
In Program Lock Mode oven will
start without pressing START
Pad. See page 14,
2 . START •Press the START Pad.
Heating will start.
The time on digital display will
count down.
Display Window
iSS
3. Beeptone will sound,
(See page 16}
•All heating will stop.
When opening the door, the display
will stop blinking.
n
U
Example: 2 stage; Memory Pad 3 (to heat for 3 minutes at HIGH and 2 minutes at DEFROST)
See page 12 to program Memory Pad.
See page 14 to activate Program Lock.
Display Window
1
.
2 . START
3. Beep tone will sound.
(See page 16)
•Press the Memory Pad 3.
In Program Lock Mode oven will
start without pressing START
Pad. See page 14.
•Press the START Pad.
The total time for both stages
will be displayed. The time on
digital display will count down.
Heating will start.
•When the oven shifts to the next stage,
a single beep tone will sound.
•All heating will stop.
When opening the door, the display
will stop blinking.
V 5S
/ S 3
n' \
u
To Select Multipe Portion Heating:
The Double Quantity Pad (x2) is factory set to automatically double the programmed time for multiple
portion heating.
Example: Memory Pad 5
1 .
DOUBLE
QUANTITY
. (XZ)
2-
•Press the DOUBLE QUANTITY
Pad.
•Press the Memory Pad 5.
In Program Lock Mode oven will
start without pressing START
Pad. See page 14.
Display Window
3. Follow steps 2 and 3 above.
< ? 0 D
- 1 0