Panasonic NE-1064F - Manual (Page 12)

igi
¡ill
NOTE: • Program the remaining Memory Pads as desired by repeating steps 1-5. You may insert up to 10
memory Programs.
• When the PROG indicator is biinking, the program can be cancelled and/or the Pad erased by
pressing the STOP/RESET Pad.
B. Programming Memory Pads for 2 or 3 Stage Heating:
Example: To program for 2 minutes at DEFROST for 2 stage heating using Memory Pad Number 5
1. Complete Steps 1 to 4 on page 11.
Display Window
2 .
POWER
LEVEL
3.
4.
(J
PROG
•Press the Power Level Selector Pad
3 times. DEF indicator light will light.
i:pTn •Press the Memory Pads 2, 0 and 0.
•Total time for 2 stage programming.
•Press the PROG Pad again. You have
completed programming the Selected
Memory Pad for 2 stage heating and
double heating time for multiple portion
heating automatically.
•2 seconds later, the display will confirm
your programming.
»9QC
5 n
i u I
' z
acF
«HOC 1 z
8
n n
u y
Moe
DEF
' 2
5
nwa I
J U
MCI
fflOG 2
I
p
\ ^
n h
u y
XI PROG
OEP
" s
X2 IH40G '
I ' /
h n
u y
xi P«oc
MED
2
n n
u u
_
OEf
I
I
i
___________________________
•After all of your programming has been
completed, the display will go blank.
NOTE: • Program the remaining pads as desired by repeating the steps above.
DO NOT OPEN THE OVEN DOOR during programming.
• For a.3 stage heating cycle, select a further power level and set the desired heating time between
steps 3 and 4 above.
- 1 2