Panasonic NE-1064F - Manual (Page 16)

to
D. To Select Beep Tone Options:
The Beep Tone can be set, ON or OFF.
1. Open the door.
2.
PROG
lET
IE
4.
PROG
n i
U
I
_Z____ I
•Press the PROG Pad. The display will
not change.
•Press the Memory Pad.
n
U
b E E f
•Repeat pressing of 0 Pad. Select “OFF” ^
of Beep Tone.
Stage Indicator 1 = ON
Stage Indicator 2 = OFF
b E E P
•Press the PROG Pad again. You have
completed programming the beep tone.
•2 seconds later, "0" will appear in the
display
•Close door 2 secobds later, the
display window wili go blank.
b E E P
n
u
E. To Read the Cycle Counter:
The oven can display the total number of times the oven has been operated cumuiativeiy. Great for
analyzing usage of the oven and traffic flow at the location.
1. Open the door.
2. STOP/
RESET
POWER
LEVEL
•While pressing STOP/RESET Pad, press
Power Level Selector Pad. The display
shows the total cumulative number of
times the oven has been used.
Example;
• 9999 means, the oven has been
used 999900 times.
• 0020 means the oven has been
used 2000 times.
• If the total cumulative number
of times less than 100 times, the
display will not be changed.
•2 seconds later, “0” will appear in the
display window.
n
u
uuuu
I J J J
I I
u
- 1 6 -