Panasonic NE-1064F - Manual (Page 9)

How to Opinale
HEATING
Open the door and place food in the oven cavity. Close the door, “0” must be showing in the display window.
A. Manual Single Stage Heating:
This feature gives the user maximum flexibility to set the oven to desired heating time and power level.
Ideal for menus that require various heating requirements.
Example: To heat for 2 minutes at High Power
Display Window
1.
" power "
[ level ,
^■! I - - ( : j 3-- c .
3. r
•Press the Power Level Selector
Pad one time.
•Press the Memory Pads 2, 0 and 0.
START
4. Beep tone will sound.
B. Manual 2 or 3 Stage Heating:
•Press the START Pad.
Heating will start.
The time on digital display will
count down.
•All heating will stop.
When opening the door, the
display will stop blinking.
2 O D
/ SS
.n:
u
This feature allows you to set to begin heating at one power level then shift automatically to a different
power level after the designated amount of heating time.
Example: To heat for 2 minutes at Defrost Power for 2nd stage heating
For Stage 1 cooking
1. Follow steps 1 and 2 above.
For Stage 2 cooking
1.
POWER
LEVEL
2 . i
]IE3
Display Window
•Press the Power Level Selector
Pad 3 times. Indicator will change
each time the pad is pressed. DEF
is now displayed. Stage 2 is
blinking.
•Press the Memory Pads 2, 0 and 0. 2 00
START
•Press the START Pad.
The total time for both stages will be
displayed. The Active Stage “1” and
the Power Level “HI" blinks. The oven
lamp will be turned on. Heating will
start.
•The total time will display and count
down.
•When oven shifts to the next stage, a
single beep tone will sound. The
Active Stage “2” and the Power Level
“DEP blink.
u n n
1 u u
J 5 5
I
0
:
4. Beep tone will sound. •All heating will stop.
(See page 16) When opening the door, the display
NOTE: will stop blinking.
For a 3 stage heating cycle, select a power level again and set the cooking time (steps 1 and 2 above).
SPECIAL NOTE: For both single and 2 or 3 stage heating.
1. While heating, one touch on the STOP/RESET Pad stops the oven. You can restart by pressing the START
Pad or a second touch on the STOP/RESET Pad will cancel the selected program.
2. One touch on the STOP/RESET Pad, before the heating cycle is started, will cancel the selected program.
9 -