Camera recording, Rec review, Camera search – Panasonic NVG2E User Manual
Page 10: Recording lock function, To start recording, To stop recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Recording
Rec Review
For checking the last few seconds of recorded scenes.
1
Put the Movie Camera in the recording pause mode.
2
Press the - SEARCH Button.
Camera Search
For checking recorded scenes.
1
Put the Movie Camera in the recording pause mode.
2
Keep the - SEARCH Button pressed to play back a scene at
high speed in reverse direction.
•The sound is not reproduced.
3
Keep the SERACH + Button pressed to play a scene at normal
speed in forward direction.
•The sound is reproduced.
Recording Lock Function
This function ensures smooth scene-to-scene continuation in
assemble recording. Even if the Movie Camera has been turned off
with the Operation Switch, the tape remains loaded around the
head cylinder. The recording lock mode is activated by turning the
Movie Camera off during recording pause. This will cancel the
White Balance setting.
• If the unit remains in the recording pause mode for more than
6 minutes, it will automatically turn itself off to protect the tape and
save battery power. (The tape remains wound around the head
cylinder. This condition is called “Recording Lock”.)
To use the Movie Camera again, turn it on with the Operation
Switch.
• If the recording lock mode continues for more than 48 hours, it will
be cancelled and the unit will be turned off.
To Start Recording
1
Slide the Operation Switch to the right to turn the Movie Camera
on.
2
Turn the EVF by 180“ towards the Lens, press Eject Button and
insert a video cassette with the erasure prevention tab intact
then, turn the EVF back to its original position.
3
Set the CAMERA/VTR Selector Cover to the “CAMERA”
position.
•The Movie Camera will be in the recording pause mode.
4
Set the Recording Speed Selector to “SP” or “LP”.
•SP: For normal tape speed
•LP: For slow tape speed
5
Place the Movie Camera in the shooting position.
Press the Start/Stop Button.
•The recording starts.
Press the Start/Stop Button again to stop the recording
temporarily. (Recording pause mode)
• If the unit remains in the recording pause mode for more than
6 minutes, it will automatically turn itself off to protect the tape
and save battery power.
To Stop Recording
1
Put the Movie Camera in the recording pause mode.
2
Slide the Operation Switch to the right to turn the Movie Camera
off.
-10-