Recording a title (confd), Playback, Tracking control – Panasonic NVG2E User Manual

Page 14: Operations, Fast forward, Rewind, Note

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording a Title (Confd)

Recording a Title

Colour

Title Mode Indicator

■ Inserting a Title in the Normal Titling Mode during

Recording

1

After having input a desired title into memory, press the Title

Button to make the title in the EVF disappear.

2

Press the Start/Stop Button to start shooting.

3

At the point where you want to insert the title, press the Title

Button. (The superimposed title can be seen in the EVF.)

•To stop the superimposition of the title, press the Title Button

again.

■ inserting a Titie in the Scroll or Wipe Mode at the Beginning

of a Recording

Perform the operation steps 1 and 2 above. After pressing the

Start-ZStop Button, wait approx. 2 seconds and then press the Title

Button.

■ Inserting a Title in the Normai Tiding Mode at the Beginning

of a Recording

1

Press the Title Button to make the title appear in the EVF.

•Confirm the Colour Indicator and the Title Mode Indicator. At

this time, it is possible to change the colour and titling mode
for the title.

2

Press the Start/Stop Button to start shooting.

•To stop the superimposition of the title, press the Title Button

again.

Playback

Tracking Control

•Insert the recorded cassette.
•Turn the Movie Camera on and set the CAMERA/VTR Selector

Cover to “VTR”.

Operations

1

Playback: Press the Play Button.

2

Cue playback: Keep the FF/(3 Button pressed during

playback.

3

Review playback: Keep the (3/REW Button pressed during

playback.

4

Still playback: Press the Pause Button during playback.

•To return to normal playback, press this button again.

5

Press the Stop Button to finish playback.

Fast Forward

Press the FFZ© Button to rapidly wind the tape forward.

Rewind

Press the ©ZREW Button to rapidly rewind the tape.

When the Picture is distorted by noise bars during playback, the
Tracking needs to adjusted.

-14-

1

Press both the Tracking ◄ and ► Buttons simultaneously.

2

Adjust the Tracking with the Tracking ◄ or ► Button.

•When playing back a tape which has been recorded on another

movie camera, it may not be possible to completely eliminate this

distortion.

•Noise which takes the form of horizontal bars appears in the Cue,

Review and Still playback modes. This is not an indication of a
malfunction.

• In the Cue, Review and Still modes, the picture may become

black and white or distorted. This is not an indication of a
malfunction.

Note:

•The sound will be played back only during normal playback.
• Playback: The tape will be rewound automatically when it

reaches its end.

•Fast Forward: The tape will be rewound automatically when it

reaches its end.

• Rewind: The tape will stop automatically when it reaches its

beginning.

•Still Playback: If the Movie Camera is left in this mode for about

6 minutes, it will switch over to the stop mode, to protect the tape

and video heads.

Advertising