AAF International AAF-CY44-50 - Manual (Page 10)

4.0 START UP PROCEDURE CHECK LIST
1. Check all electrical screw terminals for tightness.
2. Confirm that line voltage matches motor name plate.
3. Start & stop fan motor. Is motor rotation in direction of arrow?
4. Start fan. Is drum cover and flex or hopper slide gate air tight? (A
slight leak in this area will push dust up through the cyclone and out
the fan discharge to atmosphere or filter bags.)
5. Amperage draw on each of the three power lines (3 phase) should
be no greater than 10% of the motor nameplate.
- 8 -