AAF International AAF-CY44-50 - Manual (Page 13)

shaker bar from other end to remove from filter bags. Remove one row of
filters and replace with new filters.
To remove a filter bag, start at the bottom, use both hands to grab filter
and press against spring to collapse and pull away from cell plate. Repeat
for top of filter. Before installing new filters, make sure openings are clean
and free from particles.
To install a new filter, start at the top. Locate the seam and shaker look in
proper position. Using both thumbs together, collapse the spring, engage
the groove of the filter in the ell plate. Release the spring slowly and
carefully. Allow it to snap into shape. Repeat for bottom of filter, making
sure it is not twisted. Re-install shaker bars, collars and caps.
5.6 SPARE
PARTS-Call 1-800-383-DUST
It is recommended that the following spare parts be stored at the
installation site for routine maintenance purposes. Consult with your sales
representative or the factory to determine quantities required.
• Flexible hose for drum
• Gasket for drum cover
• Rubber tips for rotary airlock
• Filter
bags
When ordering replacement parts, please provide the model number and
serial or job number from the plate on the dust collector. Also provide
the type of dust that the equipment collects.
- 11 -