Power windows, 2009 mdx – Acura 2009 MDX - Owner's Manual User Manual

Page 154

Advertising
background image

To close either front window fully,
pull back the window switch firmly to
the second detent, then release it.
The window automatically goes all
the way up. To stop the window from
going all the way up, push down on
the window switch briefly.

When you push the MAIN switch in,
the switch is off, and the passengers'
windows cannot be raised or
lowered. To cancel this feature, push
on the switch again to get it to pop
out. Keep the MAIN switch pushed
in when you have children in the
vehicle so they do not injure
themselves by operating the
windows unintentionally.

AUTO REVERSE

- If either front

window senses any obstacle while it
is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.

Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.

If your vehicle's battery is
disconnected or goes dead, or the
driver's window fuse is removed, the
AUTO function may be disabled. If
the AUTO function is disabled, the
power window system will need to be
reset after reconnecting the battery
or installing the fuse.

1. Start the engine. Push down and

hold the driver's window switch
until the window is fully open.

2. Pull and hold the driver's window

switch to close the window
completely, then hold the switch
for about 2 seconds.

If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.

Power Windows

150

08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu

2009 MDX

Table Of Contents

Main Menu

Advertising