Installing a child seat, 2009 mdx – Acura 2009 MDX - Owner's Manual User Manual

Page 51

Advertising
background image

Installing a Child Seat with
LATCH
Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) at each of the second
row seats.

The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.

The location of each lower anchor is
indicated by a small button above the
anchor point.

When you install a child seat in rear
seating position, use the lower
anchors as shown in the illustration.
You can install up to three child seats
at a time with LATCH.

Do not attach two child seat
connectors to a single lower anchor
at a time.

Using the Outer LATCH

To install a LATCH-compatible child
seat in either outer second row seat:

1. Move the seat belt buckle or

tongue away from the lower
anchors.

2. Make sure there are no objects

near the anchors that could
prevent a secure connection
between the child seat and the
anchors.

MARKS

LOWER ANCHORS

CONTINUED

Installing a Child Seat

47

Dr
iv

er
a

nd

Pa
sseng

er
Sa
fet

y

08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu

2009 MDX

Table Of Contents

Main Menu

Advertising