Acura 2009 MDX - Owner's Manual - Manual (Page 95)

Adjust Outside Temp. Display
If you sometimes find that the
temperature reading is a few degrees
above or below the actual
temperature, you can adjust it by
following these instructions:
You can choose this customize item
from
‘‘METER SETUP’’ by pressing
the INFO ( ▲/▼) button repeatedly.
Adjust the outside temperature value
by pressing the INFO (
▲/▼) button
repeatedly. Press the SEL/RESET
button to set the desired value.
When your selection is successfully
completed, the display changes as
shown above, and then goes back to
the customize item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘ADJUST OUTSIDE TEMP.
DISPLAY ’’ and repeat the procedure
again.
U.S. models
Canadian models Canadian models
U.S. models
CONTINUED
Multi-Information Display
91
Inst
rument
s
a
nd
Cont
rols
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Table Of Contents Main Menu