ALTANA Smart-Chart User Manual
Page 22
Color difference components can be shown either weighted or as regular CIELAB color
differences (20). If da or db are out of tolerance they are highlighted in the corresponding
color e.g. if db is negative and out of specification it is highlighted in blue. All other
components are marked red. When using weighted components a tolerance of 1 is used
by definition.
Effect data is shown numerically and in a sparkle difference graph for each angle (21).
Again, if a value is out of tolerance it is highlighted in red.
Note: The D-Table is an individual report and does not fill the other graphs with data.
For saving of your report use the "Save As" function of Excel under the "File" menu.
The "Delete Memory" function of the toolbar allows you to delete the measured samples
from the instrument memory. Standards can only be deleted by using the delete function of
the instrument.