American Diagnostic Corporation (ADC) Diagnostix 3.5v - Manual (Page 3)

The performance and efficency of these instruments are only guaranteed when
genuine ADC
® parts and accessories are used.
Attention: There may be a risk of gases igniting when the instrument is used in the
presence of flammable or combustable gases. Working in areas with good
ventilation is recommended.
Never attempt to take the instrument apart!
There is a danger of life-threatening electrical shock. Unplug the instrument
before cleaning or when disinfecting.
Warning: Do not use batteries, electrical cords other than those included with this
product or replacement parts supplied by the manufacturer.
Warning: This product may contain a chemical known to the state of California to
cause cancer, birth defects, or other reproductive harm.
Caution: The standard material used is latex-free.
Attention: Make sure to charge wall plug-in handles for at least 12 hours before
first use and for all subsequent charges to ensure optimal capacity and battery life.
NOTE: To obtain the greatest performance from your Diagnostix™ Instrument, it is
recommended that the instrument be used within a temperature range of 50°F
(10°C) to 104°F (40°C), with a 10-95% relative humidity.
Caution: Observe the Operating Instructions!
Device double-earthed
Classification
Type-B applied part - Otoscope head with speculum
To learn more, visit our website at: www.adctoday.com.
4. BATTERY HANDLES AND INITIAL USE
4.1. Function
The ADC
® battery handles described in these Operating Instructions serve to supply
the instrument heads with power (the lamps are contained in their respective
instrument heads).
4.2. Battery Handle Options
All the instrument heads described in these Operating Instructions fit on the
following battery handles and can therefore be individually combined.
For Otoscopes, Ophthalmoscopes, Dermascope, Throat Illuminator,
Power Handles.
Wall Mounted Handle #5660E 3.5v, 230v or 120v
(with extension unit)