Vermont Casting 2477 - Manual (Page 3)

3
Dutchwest Non-Catalytic Convection Heater
30002314
1. Maximum burn times and heat outputs are based on laboratory testing using full loads of seasoned hardwoods, and may vary in individual use
depending on how the stove is operated, type and moisture content of fuels, and other factors. Maximum burn times are achieved under different
operating conditions than are maximum heat outputs.
2. These values are based on operation in building code-conforming homes under typical Winter climate conditions in the northeastern U.S. If your
home is of nonstandard construction (e.g. unusually well-insulated, not insulated, built underground, or if you live in a more severe or more temper-
ate climate), these figures may not apply. Since so many variables affect performance, consult your Dutchwest Authorized Dealer to determine
realistic expectations for your home.
4. Under specific conditions used during EPA emissions testing.
Specifications
Fig. 1 Dutchwest Convection Heater specifications.
Model 2477
A 24” (610 mm)
B 24¹⁄₂” (622 mm)
C 29³⁄₄” (756 mm)
D 23” (584 mm)
E 17¹⁄₂ ” (445 mm)
F 27” (686 mm) Center of Flue Collar, Rear Exit
G 30¹⁄₂” (775 mm)
H 5³⁄₄” (146 mm)
Log length 19” (483 mm)
Maximum burn time 1 Up to 8 hrs.
Average area heated (sq. ft.) 2 700 - 1400 (65 - 130 m 2 )
, Range of heat output 4 7,800 - 25,100 Btu/hr.
Maximum heat output 1 35,000 Btu/hr.
EPA emissions rating 4 (g/h, non-catalytic) 1.41
Weight 400 lbs. (181 kg)
Loading Side or front
Flue exit position (reversible) Top or rear
Air control One
G
F
E
D
C
B
A
2278
Dutchwest
noncat specs
5/04
H