Avlink HX-341616 - Manual (Page 12)

Matrix Switcher Series—User Manual
11
of “ALL” key is the same as output key.
- Press the “ALL” key.
- Select the one of the IN 1~4, 8 or 16 keys.
- The selected IN x key will transfer the input signal to all output channels.
- You can also press the “ALL” key and then press the “OFF” key to disable all
the displayed switching settings.
ƒ OFF: Disable the entire output channels. Press one of the OUT x keys that want to be
disabled for the output channel, then press the “OFF” key. Likewise, press the “ALL”
key and then press the “OFF” key to disable all the displayed switching settings. In
addition to switching port menu, press “OFF” key can return to the main screen during
implementing in other menu. You can also press “OFF” key to disable the light of LCD
screen for saving power.
ƒ EDID: FIX (fix mode) and OUT1 (access the first output channel) selection key.
- FIX mode:
The Matrix Switcher supplies a set of fixed EDID values to support up
to only 1080P high performance TV.
- OUT1 mode: The Matrix Switcher will access the EDID values of high
performance TV that connected to the first output channel, and copy the EDID
value to all the input channels so that the DVD player can support to all the
HDTV.
ƒ RETURN: Press this key to go back to main screen.
ƒ PLUG: Press this key to show you the status of all HDMI Type A or RJ45 jacks on the
rear panel. If the HDMI or RJ45 jack is in HPD (hot plug detect), it will appear “O” on
the screen. Alternatively, it will appear “X” specified the HDMI or RJ45 jack is unused.
ƒ INFO: Press this key to show you the Matrix Switcher’s version, ID and IP address.
) Press PLUG and INFO keys simultaneously to show you the firmware versions of
modules.
ƒ STO: The “Store Key” saves all current output/input corresponding relations up to 8
sets for a memory control.
- Press the “STO” key firstly.
- Arrange memory location. (Support up to 8 sets of memories, user can select
the memory location through OUT1~OUT8/IN1~IN8.)
- The relations among all settings will be saved in the memory permanently.
ƒ RCL: The “Retriever Key” retrieves all settings that are saved in the memory.
- Press the “RCL” key firstly.
- Then make a random to select one of output/input channel key 1~8.