Avlink HX-341616 - Manual (Page 46)

Matrix Switcher Series—User Manual
45
ƒ Upgrade: Use for firmware upgrade. For more information, refer to Appendix C
Firmware Upgrade .
ƒ Options: Allow you to configure the IP address.
ƒ Save: Click this button to save the connected combinations output and input ports. It
also includes the present input/output switching relations and all settings.
) For more relative information, refer to 5.1 Front Panel as “STO” key function.
ƒ
All Output: A Hot Key for you to set the same value to all output channels. Select the
All Output
check box, then key in example “5” value in the channel 1 output. Click
anywhere on the window, the all channels output will become “5” value.
Figure 7-14 All Output Check Box Function
ƒ AV Link: Link between audio and video.
ƒ Key In: A Hot key that is for key in the value 0~99 quickly. After setting the value, click
“Enable”
to take effect. For HX-2488 is useful from 1 to 8 values upon 8 output ports
and HX-341616 is useful from 1 to 8 values upon 8 output ports.
ƒ Previous and Next: If the connections of your Matrix Switcher are over to 8 devices,
you can click “Previous” or “Next” to view the console list by paging.
7.3.1 Audio Configuration
For audio configuration, click Audio button directly to pop-up “Audio Settings” window.
This function is only for Audio Matrix Switcher. For Audio button is useless for HX-2844
and HX-341616 (without audio configuration).
Figure 7-15 Audio Configuration