Avlink HX-341616 - Manual (Page 22)

Matrix Switcher Series—User Manual
21
6.5 Matrix Switcher Remote Control
Use the RS-232 connecting cable to connect the computer serial communication port
(COM1 or COM2) to the RS-232 communication port of the Matrix Switcher. The
computer can then be used to control the Matrix Switcher after installing of application
software. Aside from using the front panel keys for switching operation, you are also
permitted to use the RS-232
connection port for remote operation.
Figure 6-10 RS-232 and Control PC connection
Matrix Switcher also supports a LAN port allows you to control all the series connection
devices through PC Browser.
Figure 6-11 LAN port and Control PC Connection
) Matrix Switcher supports RS-232 and RS-485 on the rear panel for a remote control
and allows you to operate settings via the keys located on the front panel.