Avlink HX-331616 - Manual (Page 10)

Matrix Switcher Series—User Manual
9
5.
Front/Rear Panels
5.1 Front Panel
Figure 5-1 HX-331616 Front Panel
HX-331616 supports up to 16 Output/Input switching keys on the Front Panel allowing
you to switch signal quickly. Also refer to 8.Operation Example about below descriptions.
ƒ OUT1~16 keys (output channel): Specify the Channel 1~Channel 16 for HDMI signal
output. These keys configure the status or access the settings; you can also use these
keys to switch output channels.
ƒ IN1~16 keys (input channel): Specify the Channel 1~Channel 16 for HDMI signal input.
Use these keys to switch the connected input channels or use them to instead of
number keys upon memory selections.
ƒ ALL: This key allows user to set single input channel to all output channels. The usage
of “ALL” key is the same as output key.
- Press the “ALL” key.
- Select the one of the IN 1~16 keys.
- The selected IN x key will transfer the input signal to all output channels.
- You can also press the “ALL” key and then press the “OFF” key to disable all
the displayed switching settings.
ƒ OFF: Disable the entire output channels. Press one of the OUT x keys that want to be
disabled for the output channel, then press the “OFF” key. Likewise, press the “ALL”
key and then press the “OFF” key to disable all the displayed switching settings. In
addition to switching port menu, press “OFF” key can return to the main screen during
implementing in other menu. You can also press “OFF” key to disable the light of LCD
screen for saving power.