Avlink HX-331616 - Manual (Page 58)

Matrix Switcher Series—User Manual
57
) For 0: General selecting, you have to adjust the switcher ID on the real panel to “0”
that means the device with ID “0” will be upgraded.
4. For 1: Matrix Device will allow you to select target device based on ID 0 to 31 for
upgrading firmware.
5. Select “2: Matrix I/O Module” will allow you to upgrade I/O modules. You have to
decide which device you want to configure, and then select the suitable Device ID
and I/O Module from the drop-down menu. Click “Update” to upgrade.
) HX-331616 supports 8 modules for upgrading; you have to upgrade each module
individually.