Avlink YX-3088 - Manual (Page 10)

YX Matrix Switching System—User Manual
9
to right as NO.1 to NO.8 (in five rows). Refer to the drawing on the housing for other types of
connectors.
Different models of YX matrix systems provide a different number of input/output
connectors where users can connect to different audio/video equipment including CD/DVD
players, graphics workstations, and number display. The output connectors can be connected to
projectors, video recorders, displays and multiplexers.
5.0.1.1 Audio/Video Connecting Cable
Different models of the YX matrix system provides a different number of input/output jacks
for users to connect to different audio/visual equipment including CD/DVD players, graphics
workstations, and number displays. The output terminals can be connected to projectors, video
recorders, displays and multiplexers and so on. The YX matrix supports various AV video signal
sources.
The RCA connecting terminal----audio/video port: The 4-hole RCA Jack is a conventional
audio connector. Its installation hole measures 14x18mm.
YPbPr Connector—Standard Video Input (3-RCA) Connector:
Type: Video connectors are in pairs (Y, Pb, Pr) (Green Y, Blue Pb, Red Pr)
For YX matrix YPbPr RCA jack connection, see Figure 6-2 below:
Figure 6-2 YPbPr-RCA Connecting Cables
RCA, an abbreviation for lotus socket, is a DVD component (YpbPr) socket.
The YpbPr connector is a high definition digital TV connector (color contour YpbPr)
capable of connecting with high definition digital set-top box, satellite receiver and various high
definition monitors and TV equipment.
Color difference output (YPbPr) connector separates the modulated Y, PB and PR signals. It
separates the colorimetry C signal into blue b-Y color difference and red r-Y color difference and
uses 3 cables for separate transmission to improve display resolution. This way, it ensures the
largest bandwidth of colorimetry and averts interference to the signals because the signals are
transmitted by 3 separate cables and each cable is being properly sleeved.
The Audio Connecting Cable:
Type: The audio connecting cables are in pair for left and right channels (R for red and L
for left).
Connection of the RCA connector of the YX matrix audio is as shown in Figure 6-3
below: