Avlink YX-3088 - Manual (Page 18)

YX Matrix Switching System—User Manual
17
6.0 Matrix Control Panel Operation
6.0.1 Input/Output Switching Key Operation Mode
You can use the front panel keys of the YX Matrix system for fast audio/video switching.
(For details in key pressing, refer to the “Front Panel Key Pressing Instructions”.)
Operation methods as follows:
“Switching Methods” + “Output Channel＂+“Input Channel＂
Description: ‘
“Switching Methods”
Synchronous audio/video switching or separate switching: Using the “Audio” and “Video” keys
on the front panel, you can select “Synchronous Audio/Video Switching,” “Audio Switching
Only” or “Video Switching Only.”
“Output Channel＂
The “OUT Row 1-8” keys on the front panel represent output channels 1 to 8 for connection to
peripheral display.
“Input Channel＂
The “IN Row 1-8” keys on the front panel represent input channels 1 to 8 for connection to the
currently connected channels of the signal source to be switched.
6.0.2 Front Panel Key Functions
Part Function Key Function
1 LCD display shows current YX matrix status and
operation hints.
2 Output channel selection keys used for setting
audio/video output channels or for selection of Status
Retrieve or Stored Number.
3 Input channel selection keys used for setting audio/video
input channels or for selection of Status Retrieve or
Stored Number.
4 ALL
Implement all output selection keys via certain input
route.
---Example: First press the “ALL” key, then select the
input channel to output to all output channels; first press
the “ALL”key, then press the “OFF” key to close all the
presently displayed swtitching status.