Avlink YX-3088 - Manual (Page 21)

YX Matrix Switching System—User Manual
20
Key LCD Display Operation
4.Press the NO.3 key of the output
channel for 2 seconds and enter the
input channel when the red 0 on
LCD flickers.
5.Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1 and
NO.3 channels. Enter the output
channel when VIDEO shows “4” at
NO.1 and NO.3 channels on LCD.
6.Press the NO.5 key of the output
channel for 2 seconds and enter the
input channel when the red 0 on
LCD flickers.
7.Press the NO.4 key of the input
channel for 2 seconds to select
operation of input from NO.4
channel and output from NO.1, 3 and
5 channels. Enter the output channel
when VIDEO shows “4” at NO.1, 3
and 5 channels on LCD.
8. Press the NO.6 key of the output
channel for 2 seconds and enter the
input channel when the red 0 on
LCD flickers.
9. Press the NO.4 key of the input
channel for 2 seconds to select the
operation of input from NO.4
channel and output from NO.1, 3, 5
and 6 channels. VIDEO shows “4” at
NO.1,3, 5 and 6 channels on LCD.