Avlink YX-3088 - Manual (Page 23)

YX Matrix Switching System—User Manual
22
Figure 7-1 《AV Matrix》 Control Software Usage Interface
Scroll on the left lower corner to view contents as shown below.
7.0.2.1 Main Operation Interface Functions
Refer to the window menu above, the interface blue area shows crossing matrix of output
ports 01-08 and input ports 01-08. On the lower right hand corner, you can select either
“Video” for signal input switching or “Disconnect”to close all output ports. Click to check the
white box to the left of “Video” or “Audio” for video or audio signal transimission.
Examples for Selecting Matrix Switching Functions:
Example 1: Now there is a YX-3088 matrix having all the input/output ports properly
connected to the equipment. There are two ways of operation if you want to set channel 1
audio/video to channels 2, 3 and 5 for output and channel 3 audio/video to channel 6 for output:
First way: Make sure you have selected“Video” and “Audio” by checking the white boxes
to the left. Directly click on the corresponding icons on the matrix to turn them into
to complete the switching operation.
Second way: