Avlink CX-2088 - Manual (Page 18)

CX Matrix Switching System—User Manual
17
6.0 Matrix Control Panel Operation
6.0.1 Input/Output Switching Key Operating Mode
Fast audio/video switching of the Matrix systems can be done by pressing keys on the front
panel (refer to the “Front Panel Key Pressing Instructions” for detail key pressing.)
Operation methods as follows:
“Switching Method＂+“Output Channel＂+“Input Channel＂
Follow instructions below:
“Switching Method＂
For synchronous audio/video switching or alternative switching, select “Synchronous
Audo/Video Switching,” “Audio Switching” or “Video Switching” as per “Audio” and “Video”
keys.
“Output Channel＂
The “OUT Row 1-8” keys on the front panel represent output channels 1 to 8 for connection to
peripheral display equipment.
“Input Channel＂
The “IN Row 1-8” keys on the front panel represent input channels 1 to 8 for connection to the
currently connected channels of the signal source to be switched.
6.0.2 Front Panel Key Functions
Part Function Key Function
1 LCD display shows current CX matrix status and
operation hints.
2 Output channel selection keys used for setting
audio/video output channels or for selection of Status
Mode or Reserved Number.
3 Input channel selection keys used for setting audio/video
output channels or for selection of Status Mode or
Reserved Number.
4 ALL
Implement all output selection keys via certain input
route.
---Example: First press the “ALL” key, then select the
input channel to output to all output channels; first press
the “ALL”key, then press the “OFF”key to close all the
presently displayed swtitching status.