Avlink CX-2088 - Manual (Page 26)

CX Matrix Switching System—User Manual
25
Now, you have to close output ports 03, 05 and 06.
Step 1: First press down the output number keys 03, 05 and 06 to the right;
Step 2: Press the “Disconnect” key;
Step 3: Press up the previously-pressed output number keys 03, 05 and 06 (or press the
“Deselect all output”key) to end the operation.
The final results will be as shown in Figure 7-3 below:
Figure 7-3
7.0.2.3 Select all output、DeSelect all output Switching Function Usage
（1）Select all output Function Description: You can use this function to select one port for input
and all output ports for output.
A specific example of operation is described below:
Example: Now, you have a CX-2088 matrix with all input and output ports properly
connected to the equipment. The needed input/output ports should be set to audio/video channel
1 while switching all output ports to output.
Make sure that you have selected boxes to the right of “Video” and “Audio”. Then, press
down the “Select all output” key. Afterwards, select the input 01 key to the bottom. Press all the
icons on row 01 to turn them into icons to end the operation.
（2）DeSelect all output Function Description: Use this function to close the “Select all
output”function.