Avlink CX-2088 - Manual (Page 25)

CX Matrix Switching System—User Manual
24
Upon completion of the above 2 steps, you have actually completed the switching operation of
having switched Video channel 1 to Output channels 1, 6 and 7 while at the same time
successfully switched from Audio channel 2 to Output channel 8.
Second Way:
Step 1: Make sure that you have selected “Video＂ and not“Audio＂;
Step 2: Select the output number keys 01, 06 and 07 to the right, and the input number key 01
to the bottom. Afterwards, press the previously-selected output number keys 01, 06 and 07
respectively (or press the “Deselect all output” key). This way, you have completed videio
switching of selecting input 01 and output 01, 06 and 07.
Step 3: Make sure that you have selected “Audio” and not “Video”;
Step 4: Select the output number key 08 to the right and the input number key 02 to the
bottom. Afterwards, press the previously-selected output number key 08 (or press the “Deselect
all output” key). This way, you have successfully completed audio switching of selecting input
02 and output 08.
Upon completion of the above 4 steps, you have actually completed the operation of switching
video channel 1 to output channels 1, 6 and 7 while switching audio channel 2 to output channel
8.
7.0.2.2 Disconnect Function Key
Close all the output ports.
A specific example of operation is described below:
The present input and output relations are shown in Figure 7-2 below:
Figure 7-2